Linn Komponent 120 Loudspeakers

All Komponent loudspeakers including the Komponent 120 use extruded aluminium cabinets with advanced damping materials to minimise cabinet vibrations. The single piece structure with no glued joints brings greater rigidity and constructing the Komponent loudspeaker cabinets from aluminium helps to maximise the internal volume of each loudspeaker for the best possible audio performance.

The Komponent 120 loudspeakers have also been specifically designed for wall mounting, and at approximately 155mm deep are perfect for mounting alongside a plasma or LCD screen.

The unique design of the Komponent 120 Bass-Reinforcement loudspeaker gives additional flexibility when positioning it within your room. Its attractive, low-profile design means it can be tucked away out of sight or even wall or ceiling mounted, rather than dominating your room.

The intelligent design of the Komponent loudspeaker system means cables are carefully concealed within the structure of the loudspeaker cabinets, ensuring the system remains as unobtrusive as possible.

Features:

• New 2K Driver Array
  
• Stylish aluminium cabinet design
  
• Shallow cabinet for on-wall applications
  
• On-wall or on-stand mounting options allow discreet
  placement of loudspeakers
  
• Unique, flat, bass reinforcement loudspeaker design is unobtrusive yet powerful
  

Linn Komponent 106 - Left/Right/Centre All-in-one Speaker

The Linn Komponent 106 is made from extruded aluminium with highly advanced damping materials that will minimise the vibrations through the cabinet. there are no glued joints as the single piece structure gives a greater rigidity which helps towards the exceptional performance you receive.

The Komponent 106 loudspeakers featues Linn's patented 2k driver array technology which houses both the tweeter and super-tweeter in an alloy chassis, this is isolated from the rest of the cabinet so that you get incredibly pure sound reproduction.

Komponent 106 speakers are designed sop taht you can wall mount them and are only 155mm deep so they do not look out of place when mounted near your plasma or LCD screen

The intelligent design of the Komponent loudspeaker system means cables are carefully concealed within the structure of the loudspeaker cabinets, ensuring the system remains as unobtrusive as possible.

Features

Type - 4-way centre loudspeaker, wall mountable
Drive Units - 16 mm (0.6”) treble, 30 mm (1.2”) mid,, 100 mm (4”) bass, 130 mm (5”) lower bass, 130 mm (5”) passive radiator
Recommended amplifier power - Minimum 60 W / channel into 4 Ω
Efficiency - 85 dB for 1 Watt at 1 m (1 kHz)
Crossover / wiring options - Passive single, bi, tri or quad wired; Passive single, bi, tri or quad amped, AKTIV
Crossover slope - 6 and 12 dB / octave Butterworth
Frequency response - 70 Hz - 20 kHz
Crossover points - 200 Hz, 1 kHz, 3.6 kHz
Nominal input impedance - passive: 6 Ω
Input connectors - Binding post / 4mm banana plug
Magnetic Shielding - Yes
Dimensions (speaker only) - 180 mm (H) x 559 mm (W) x 155 mm (D)

Linn Komponent 104 Loudspeakers

The Linn Komponent range of speakers contain something ro suit all requirements, the Komponent 104 loudspeakers are a compact, yet elegant speaker that is designed to perfectly complement any Linn system, in both looks and sound.

The cabinets opf the Komponent 104's are made from aluminium which provides superior strength while allowing the design to be kept as slim as possible. As with all their speakers Linn have used high grade drivers to ensure that you receive the sound you would expect from one of their products.

Komponent 104 speakers are easily wall mounted but can also be free standing on a shelf.

Features

• 3-way loudspeaker design incorporating the 2K Driver Array
• Extruded aluminium cabinet only 155 mm deep
• Minimum amplifier requirements: 40 watts per channel into 4 ohms
• Efficiency 85 dB for 1 W at 1 m (1 kHz)
• Drive units: 16mm treble, 30mm mid and 100mm bass
• Frequency response 80Hz - 20 kHz
• Nominal input impedance - passive 6 Ohms
• Crossover / wiring options: Passive Single, Bi or Tri wired; AKTIV Passive Single, Bi or Tri amped
• Input connectors Binding post / 4 mm banana plug
• Magnetically shielded
• Can be wall mounted with bracket supplied
• Dimensions: (HxWxD): 245 x 180 x 155mm - 4kg

Linn Komponent 110 - Loudspeakers From Linn

Linn have done it again with the Komponent 110 floor standing loudspeakers, not only are they elegant but they are technically brilliant.

These speaker have been developed and test ed by some of the leading acoustic engineers in the world and will enhance you music and movie experiences.

Linn's Komponent 110 speakers have aluminium cabinets with advanced dampening materials that help to minimise the vibrations through the cabinet, they are created from a single piece so there are no joints to reduce the regidity helping to give you the best possible performance.

These Komponent 110 loudspeakers have been designed so that they can be wallmounted next to your plasma or LCD screen

The intelligent design of the Komponent loudspeaker system means cables are carefully concealed within the structure of the loudspeaker cabinets, ensuring the system remains as unobtrusive as possible.

All the Komponent loudspeaker system is the perfect partner for Linn’s Unidisk SC multi-format music and movie player/processor, and the Majik 5100 power amplifier.

• Linn Komponent 110 Floor Standing Speaker (Pair)
  
• 4-way loudspeaker design incorporating the proprietary new 2K Driver Array
• Extruded aluminium cabinet only 155 mm deep
• Minimum amplifier requirments: 60 watt per channel into 4 ohm
• Loudspeaker base kit for floorstanding (also included)
  
• Dimension (HxWxD): 1005 x 180 x 155 mm - 11kg